Melbourne Tool Company Large Router Plane Blades - Metric

50-Degree Straight Blades

The MTC Large Router Plane is built differently from most. Its blade is made from a straight square section of HSS steel and bedded bevel-down at 50 degrees. The bevel itself simply relieves the cut, giving you an efficient cutting angle that works well for trenching tasks, and a plane that’s very straightforward to sharpen.

Easy to Sharpen

Because the blades are cut from a single piece of straight steel, sharpening couldn’t be easier. Just remove the blade from the body, hone it like a mortise chisel, and reset. No special jigs or equipment are necessary—helping you stay productive with less downtime.

A Range of Blade Widths

The MTC Large Router Plane comes standard with a 1/2in (12.7mm) blade. Additional blades are available in both Metric and Imperial sizes, giving you options to match different joinery needs.

Metric blade widths available:

• 3.0mm
• 6.0mm
• 8.0mm
• 10.0mm
• 12.0mm

M2 High-Speed Steel Blades

MTC uses M2 High-Speed Steel (HSS) for these blades. Known for its excellent abrasion resistance, M2 HSS keeps a sharp edge much longer than many other steels. While it can take a little extra effort to bring the edge up initially, you’ll find yourself sharpening less often—keeping your blades working longer between sessions.